Easily check your error code

Samsung · Washer

Samsung Washer DC Error Code: Door Not Locked (or Unbalanced Load)

Also shown as: dC, dc, DC1, dC1, 1 dC, dE, dE1

DC

DC on a Samsung washer usually means the door is not detected as closed and locked: check the latch and that no laundry is caught in the door. On some models, Samsung says dc means an unbalanced load instead, so check your user manual.

Easy⏱ 5–20 minUpdated 2026-11-18

What DC means

On most Samsung washers, DC (also dC, DC1 or dE) is a door error: the washer cannot confirm the door is shut and locked, so it will not start or continue the cycle. Samsung US notes that on some models a lowercase dc is an unbalanced-load error instead, and Samsung Hong Kong lists UE or DC as an unbalanced load on its front-loaders. Your user manual's code table settles which one your model uses. The fix is different, so check that first.

Likely causes (most → least common)

  1. Door not fully closed or laundry caught in itMost common

    A sleeve or sock trapped between door and seal stops the lock from engaging. Samsung's first check in every region is that the door is closed properly and nothing is in the way.

  2. Child Lock active with water in the drum (US models)Common

    Samsung US says the door code can appear even when no cycle is running if Child Lock is on and there is water in the tub. If the door is not closed or Child Lock is not turned off within 30 seconds, the washer drains the water.

  3. Unbalanced load (models where dc means unbalance)Common on some models

    On models that use dc for an unbalanced load, one heavy item or a tangled load stops the spin. Untangle and redistribute the laundry, then restart.

  4. Latch or door lock not secure, or damagedLess common

    Samsung asks you to check that the latch is securely fixed. A bent or broken latch, or a faulty door lock, needs service.

  5. Missing rubber button next to the upper latch (FlexWash only)Rare, model-specific

    Samsung US says FlexWash washers show 1dC4 if the rubber button next to the upper washer's latch is missing. Replacing the button fixes it and no service is needed.

How to fix it, step by step

  1. Check which meaning your model uses

    Find your model number on the rating label and look up DC/dc in the code table of your user manual (Samsung's download centre has it). If your manual lists it as an unbalanced load, skip to the unbalanced-load step.

    Easy⏱ 5 min🔧 No tools
  2. Open and firmly close the door

    Open the door, look along the whole door seal for trapped laundry, and press the door shut until it clicks. Then press Start again.

    Easy⏱ 2 min🔧 No tools
  3. Inspect the latch

    Look at the hook on the door and the lock opening on the cabinet. Samsung asks you to make sure the latch is securely fixed. If it is loose, cracked or bent, do not force it, because that is a service job.

    Easy⏱ 3 min🔧 Flashlight
  4. Turn off Child Lock if it is on

    If the child-lock icon is lit, turn Child Lock off. The button combination is in your manual and on many models is printed on the panel. If water is in the drum, keep the door closed and let the washer drain it.

    Easy⏱ 2 min🔧 No tools
  5. If your model uses dc for unbalance: redistribute the load

    Untangle the laundry and spread it evenly around the drum, close the door and restart the cycle. A single heavy item, like a bath mat, often won't balance by itself. Samsung UK suggests adding 2–3 towels to it. On front-loaders, also check that the transit (shipping) bolts were removed and that the washer stands level.

    Easy⏱ 10 min🔧 Spirit level
  6. Power-cycle and test

    Turn the washer off, wait a few minutes, turn it back on and start a short cycle. If the code comes back with the door clearly shut and nothing trapped, request service.

    Easy⏱ 5 min🔧 No tools

When to call a professional

  • The code returns even though the door is closed, nothing is caught and Child Lock is off.
  • The latch, door hook or hinge is visibly damaged or the door no longer lines up.
  • The door will not unlock after the cycle and the drum is empty. Do not pry it open.
  • On unbalanced-load models: the code returns with an even, normal-sized load and the washer is level.

Parts that may be involved

Always match the part to your exact model number (rating label) before ordering.

Door lock / door switch assembly (model-specific)

Only if the door shuts properly but is still not detected as locked. This is usually confirmed by a technician.

Fit: Match your exact model number; front- and top-loaders use different locks.

No price shown — prices are only listed when verified on a retailer page.

Door hook / latch striker

If the hook on the door is cracked or bent.

Fit: Model-specific; often sold with screws.

No price shown — prices are only listed when verified on a retailer page.

Related codes

More Samsung washer codes

All Samsung washer error codes · Every code A–Z

FAQ

Does DC mean door or unbalanced load on a Samsung washer?

Usually it means the door. Samsung UK and Samsung Australia list DC as a door error, and Samsung US lists dC with the door errors. But Samsung US also says that on some models dc is an unbalanced-load error, and Samsung Hong Kong groups UE and DC together as unbalanced. Your manual's code table decides.

Why does my Samsung washer show dC when it isn't running?

On US models, Samsung says this can happen if Child Lock is on and there is water in the tub. Close the door or turn Child Lock off within 30 seconds, otherwise the washer drains the water.

What is the difference between dC and ddC?

ddC (or dC3) refers to the small Add Door on models that have one, not the main door. It often appears when the Add Door was opened without pausing first. Close it firmly, then press Start/Pause.

How do I reset a Samsung DC error?

Fix the cause first (close the door properly or rebalance the load), then turn the washer off and on and restart the cycle. A reset alone won't stop the code if the door still isn't detected as locked.

Sources

This guide paraphrases the manufacturer's own support documentation. We re-check sources regularly.