Samsung · Washer
Samsung Washer 3C Error Code: Motor Problem — What You Can Check
Also shown as: 3E, 3E1, 3E2, 3E3, 3E4, E3 (some models), 1 3C, 3CP
3C (3E on older models) means your Samsung washer detected a problem with the drum motor. Try a power reset and a smaller load first. If the code returns, Samsung recommends service. On some models 3E is a voltage error instead.
What 3C means
Samsung lists 3C, 3E and their variants (3E1–3E4, 1 3C) as a motor error: the washer's control could not drive the drum motor as expected. Samsung Saudi Arabia names possible causes such as an overloaded drum, a loose motor sensor connection, a control-board (PBA) fault or a foreign object such as a screw in the motor. Only the first one is something you can fix at home. Note also that Samsung US says on some models 3E is a voltage error, not a motor error. Your user manual's code table tells you which. 3CP is listed separately by Samsung UK as an electronic control issue.
Likely causes (most → least common)
- Drum overloaded or a heavy, tangled loadMost common DIY cause
Samsung Saudi Arabia lists motor overload from too much laundry first, and says the code often appears when the drum is overloaded.
- Temporary control glitch or power fluctuationCommon
Samsung's first step in the UK, Australia and Saudi Arabia is the same: switch off at the mains, wait, switch on and start a new programme. On models where 3E is a voltage error, Samsung US asks you to make sure the washer is on its own circuit and not on an extension cord.
- Foreign object jamming the drum or motorOccasional
Samsung names a foreign object such as a screw entering the motor as one possible cause. Repair forums also commonly report coins or bra underwire trapped between drum and tub.
- Loose motor sensor connection or wiringLess common
A disconnected motor hall-sensor or housing terminal. This is inside the machine, so it is a technician job.
- Motor or control board (PBA) failureLess common
If the code keeps returning after a reset with a normal load, Samsung recommends contacting service.
How to fix it, step by step
Check whether 3E means motor or voltage on your model
If your display shows 3E, look it up in your user manual. On some Samsung models it is a voltage error, and then the fix is to plug the washer straight into its own wall outlet with no extension cord.
Power reset
Switch the washer off at the mains. Samsung UK says wait 1 minute, Samsung Australia 2–3 minutes and Samsung Saudi Arabia 30 seconds, so waiting a few minutes covers all of them. Switch it back on and start a new programme.
Reduce and rebalance the load
Take some laundry out, untangle the rest and spread it evenly. Then run the cycle again. Overloading is the one motor cause you can fully fix yourself.
Check the drum turns freely
With the washer unplugged and empty, turn the drum slowly by hand. It should move smoothly. If it scrapes, sticks or you hear metal on metal, something may be trapped between drum and tub. Stop and request service rather than taking the machine apart.
Request service if the code returns
If 3C comes back with a normal load after a reset, the cause is inside the machine (motor, its sensor wiring or the control board). Samsung advises contacting service, and continuing to run it may cause further motor damage.
When to call a professional
- 3C returns after a power reset with a normal, balanced load.
- The drum is hard to turn, grinds or makes metallic noises.
- You smell burning or the washer trips the circuit breaker. Stop using it and unplug it.
- Any repair that means removing the back panel or touching the motor, wiring or control board.
Parts that may be involved
Always match the part to your exact model number (rating label) before ordering.
Drive motor / stator (model-specific)
Only if a technician confirms the motor has failed.
Fit: Match the exact model number and version code on the rating label.
No price shown — prices are only listed when verified on a retailer page.
Motor hall sensor
A common part on direct-drive motors when the sensor or its connector is faulty.
Fit: Model-specific. Must be diagnosed first.
No price shown — prices are only listed when verified on a retailer page.
Main control board (PBA)
Only if diagnosed as the cause. It is an expensive part, so get a diagnosis first.
Fit: Model-specific.
No price shown — prices are only listed when verified on a retailer page.
Related codes
More Samsung washer codes
FAQ
Can I fix a Samsung 3C error myself?
Only the simple causes: a power reset and reducing an overloaded or tangled load. If the code comes back after that, Samsung recommends service, because the remaining causes are inside the machine.
Is 3C the same as 3E?
Yes, on most models. Samsung lists 3C, 3E and 3E1–3E4 as motor errors. On some models, though, Samsung US says 3E is a voltage error, so check your manual.
What does 3CP mean?
Samsung UK lists 3CP separately as an electronic control issue and advises restarting the cycle.
Is it safe to keep using the washer with a 3C code?
Samsung notes that if the code keeps happening, it may need technical inspection to prevent further motor damage. If it returns after a reset, stop and get it inspected.
Sources
This guide paraphrases the manufacturer's own support documentation. We re-check sources regularly.
- What do the codes on my washing machine mean? — Samsung UK (last checked 2026-11-18)
- Samsung Washing Machine Error Codes — Samsung Australia (last checked 2026-11-18)
- Samsung washing machine information and error codes — Samsung US (last checked 2026-11-18)
- What does the error code (3E) mean and how to fix it? — Samsung Saudi Arabia (last checked 2026-11-18)