Samsung washer error codes
Samsung washer codes cover water supply (4C/4E), draining (5C/5E), unbalanced loads (UE/UB) and too many suds (SUD). Newer displays show a "C" where older ones show an "E", so 4C and 4E are the same problem. Most of these have an easy DIY fix. The table gives each code's meaning at a glance, and each guide goes through the causes from most to least likely.
Quick reference
| Code | Meaning | DIY |
|---|---|---|
| 3C | Motor problem — what you can check (also 3E, 3E1, 3E2, 3E3, 3E4, E3 (some models), 1 3C, 3CP) | Hard |
| 4C | Water not filling (also 4E, nF, 1 4C (on some top-loaders)) | Easy |
| 5C | Not draining (also 5E, SE, SC, nd) | Easy |
| DC | Door not locked (or unbalanced load) (also dC, dc, DC1, dC1, 1 dC, dE, dE1) | Easy |
| HC | Water temperature or heater problem (also HE, H1, Hr, 1 HC, HC2, HE1) | Moderate |
| LC | Water leak or water level problem (also LC1, LE, LE1, 1C, 1E, 1 LC, 1 1C, 11E) | Easy |
| SUD | Too many suds (also SUd, 5UD, 5Ud, Sd, 5d, SUdS, 5Ud5) | Easy |
| UE | Unbalanced load (also UB, Ub, U6, E4, 1 Ub) | Easy |
Before you start
- Write down the exact code and your model number first. The model number is on the rating label (often inside the door or lid, or on the back). The same code can differ between model families and regions.
- Most washer codes have a free fix: a tap that isn't fully open, a kinked hose, a full pump filter, an overloaded or tangled drum, or too much detergent. Check those before you order any parts.
- Unplug the washer before you open the pump filter or move hoses. After a hot cycle, give the water time to cool.
- Clearing the code by switching off and on does not fix anything. If you don't fix the cause, the code comes back.
Guides
3CSamsung Washer3C (3E on older models) means your Samsung washer detected a problem with the drum motor. Try a power reset an…Hard4CSamsung Washer4C means your Samsung washer is not getting enough water. In most homes it is a closed or half-open tap, a kin…Easy5CSamsung Washer5C (5E on older models) means your Samsung washer cannot drain. Samsung says a badly routed or kinked drain ho…EasyDCSamsung WasherDC on a Samsung washer usually means the door is not detected as closed and locked: check the latch and that n…EasyHCSamsung WasherHC (HE on older models) on a Samsung washer is a water-temperature or heating error. Samsung UK and Australia …ModerateLCSamsung WasherLC (LE on older models) means your Samsung washer detected water where it shouldn't be or a water-level proble…EasySUDSamsung WasherSUD (also shown as Sd or 5Ud) is not a fault: your Samsung washer found too much foam and pauses so the suds c…EasyUESamsung WasherUE (or UB) means the drum is unbalanced, so the washer stopped spinning to protect itself. Usually it is one h…Easy