Samsung dishwasher error codes
Samsung dishwasher codes, explained from Samsung's own support documentation. The leak code (LC, or LE on some models) is the most common one. Its usual causes are hand dish soap, too much rinse aid or a loose hose, not a broken part.
Quick reference
| Code | Meaning | DIY |
|---|---|---|
| 5C | Not draining (also 5E, SC, SE) | Easy |
| LC | Leak detected (also LE) | Moderate |
| OC | Too much water (over-level) (also 0C, OE, oE) | Easy |
Before you start
- Write down the code and your model number first. The rating label is usually on the edge of the door or inside the tub rim.
- Drain and leak codes are often caused by a dirty filter, a kinked drain hose, a blocked air gap or garbage-disposal connection, or too much (or the wrong) detergent.
- Turn off the power and close the water supply before you look under the dishwasher. Water left in the tub can be hot.
- If the leak protection has tripped, find and fix the leak before running the dishwasher again.
Guides
5CSamsung Dishwasher5C (or 5E) means your Samsung dishwasher can't drain. Samsung's checklist: clear the sink drain and garbage di…EasyLCSamsung DishwasherLC (or LE) means the leak sensor in the base of your Samsung dishwasher detected moisture. The dishwasher keep…ModerateOCSamsung DishwasherOC (also shown as 0C or oE) means your Samsung dishwasher detected more water inside than it should hold. It i…Easy