Whirlpool washer error codes
Whirlpool washer codes have an F part and an E part. F8E1 (also LO FL) means not enough water is coming in, and F9E1 means draining took too long (Whirlpool says typically more than 8 minutes). Both have DIY checks: valves, hoses, inlet screens, drain hose height and the pump filter on models that have one.
Quick reference
| Code | Meaning | DIY |
|---|---|---|
| F8E1 | Low water flow (also F8 E1, LO FL, Lo FL, LF) | Easy |
| F9E1 | Long drain time (also F9 E1) | Easy |
Before you start
- Write down the exact code and your model number first. The model number is on the rating label (often inside the door or lid, or on the back). The same code can differ between model families and regions.
- Most washer codes have a free fix: a tap that isn't fully open, a kinked hose, a full pump filter, an overloaded or tangled drum, or too much detergent. Check those before you order any parts.
- Unplug the washer before you open the pump filter or move hoses. After a hot cycle, give the water time to cool.
- Clearing the code by switching off and on does not fix anything. If you don't fix the cause, the code comes back.