GE dishwasher error codes
GE dishwasher codes covered here: H2O (often read as H20) means the dishwasher got too little water during its fill. The usual cause is a hot-water valve under the sink that isn't fully open.
Quick reference
| Code | Meaning | DIY |
|---|---|---|
| H2O | Not enough water (also H20) | Easy |
Before you start
- Write down the code and your model number first. The rating label is usually on the edge of the door or inside the tub rim.
- Drain and leak codes are often caused by a dirty filter, a kinked drain hose, a blocked air gap or garbage-disposal connection, or too much (or the wrong) detergent.
- Turn off the power and close the water supply before you look under the dishwasher. Water left in the tub can be hot.
- If the leak protection has tripped, find and fix the leak before running the dishwasher again.