Electrolux washer error codes
Electrolux washer codes covered here: E20 (also E21, C2, or two beeps/flashes) means the washer could not drain in time. A blocked drain filter is one of the most common causes.
Quick reference
| Code | Meaning | DIY |
|---|---|---|
| E20 | Not draining (also E21, C2, 2 beeps / 2 flashes) | Easy |
Before you start
- Write down the exact code and your model number first. The model number is on the rating label (often inside the door or lid, or on the back). The same code can differ between model families and regions.
- Most washer codes have a free fix: a tap that isn't fully open, a kinked hose, a full pump filter, an overloaded or tangled drum, or too much detergent. Check those before you order any parts.
- Unplug the washer before you open the pump filter or move hoses. After a hot cycle, give the water time to cool.
- Clearing the code by switching off and on does not fix anything. If you don't fix the cause, the code comes back.